Product Details:
| Minimum Order Quantity | 01 Piece |
| Weight | 25 kg |
| Airflow | 1 meter cu / 16.67 lpm |
| Product Dimension | 460 x 360 x760 |
| Power Source | Electronic |
| Frequency | 50 |
| Voltage | 240 volt |
| Energy Consumption | UNIT |
| Metal Karatage | ALUMINIUM |
| Usage Application | PM 10 AND 2.5 SAMPLING |
| Country of Origin | Made in India |
Ø PM10 and PM2.5 Impactors of sampler based on designs standardized by US EPA.
Ø The GTI-241 uses a brushless pump with a low noise.
Ø Easy Sampling PM10 and PM2.5 both in one time.
Ø Low sampling rate of 1m3/hr reduces filter choking even in areas having high FPM levels.
Ø Critical Orifice maintains constant sampling rate of 1m3/hour.
Ø Compact and portable for convenient field operation.
Ø This sampler suitable for measurement of PM10 and PM2.5 simultaneously
Ø PM10 & PM 2.5 Impactors of sampler are based on designs standardized by USEPA
Ø Critical orifice maintains constant sampling rate of 1m3/hr.
Ø Sampler can run continuously for 28 hrs monitoring.
Ø Pump assembly brushless and noiseless motor with low maintenance.
Specifications:
|
Particle Size: |
Omni-directional air inlet with PM 10 separation through an impactor followed by PM 2.5 separation through a WINS Impactor. |
|
Sampling rate: |
Constant sampling rate of 1m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system. |
|
Filter Media: |
Filter holder designed to accept any standard 47 mm diameter filter media. |
|
Sample Volume: |
Fitting 2Nos. of Dry Gas meter records the total air volume sampled for PM10 & PM2.5. |
|
Power Requirement |
Single phase AC 220 Volts, 50 Hertz supply. Sampler unaffected by +/- 10% fluctuation in supply voltage |
|
Gaseous sampling |
A gaseous sampling attachment allows measurement of NH3,SO2,NOX O3.
|
Additional Information:
Product Details:
| Separator size | PM 10 |
| Flow Rate | 0.6 m3 - 1.4 m3 |
| Warranty | 1 Year |
| Weight | 40 Kg |
| Airflow | 0.6 m3 - 1.4 m3 |
| Power Source | Electronic |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Weight | 38 KG |
| Airflow | 0.9 to 1.4 Cubic meter per min. |
| Power Source | electric |
| Voltage | 220 volt |
| Country of Origin | Made in India |
Additional Information:
Product Details:
| Minimum Order Quantity | 1 Piece |
| Weight | 38 KG |
| Airflow | 0.6 TO 1.4 CU METER |
| Product Dimension | 400 x 300 x 700mm |
| Power Source | Electronic |
| Frequency | Nominal 220 V,Single Phase,50Hz AC mains supply. |
| Display Size | 6" |
| Flow Rate | .9 - 1.4 m3 /min free flow |
| Warranty | 1 YEAR |
| Country of Origin | Made in India |
Specification of GTI 151N.
1. | Flow Rate | 0.9 – 1.4m3/min |
|
2. | Particle Size | 10 Microns to 0.5 Micron collected on Filter paper. Filter holder designed to accept any standard filter sheet of 8”x10” size. SPM bigger than 10 microns collected in a separate sampling bottle | |
3. | Sampling Time | 28 hours (maximum) |
|
4. | Sampling Time Record | 0 to 9999.99 hrs. New Time-Totalizer circuit detects blower stoppage due to any reason including brush failure | |
5. | Automatic Sampling Control | A programmable digital timer is used to shut off the sampler after a preset sampling interval. | |
6. | PowerRequirements
| Nominal 230+10V AC Mains input. Voltage |
|
7. | The Air Inlet pipe and cyclone design have been modified to provide a sharper cut-off | ||
8. | A digital timer has more accurate timing control. | ||
9. | Time totalizer circuit has been improved to reduce field failures
| ||
Additional Information: